Operator 2 – Equipment
Location: Geita, Geita, TZ
Post Start Date: Oct 23, 2025
ABOUT GEITA GOLD MINING LTD
Geita Gold Mining Ltd (GGML) is Tanzania’s leading gold producer with a single operation in Geita Region. The company is a subsidiary of AngloGold Ashanti, an international gold producer headquartered in Denver, USA. AngloGold Ashanti (AGA) has operations in more than ten countries across four continents. Geita Gold Mining Limited (GGML) is situated in the Lake Victoria Gold fields of Northwestern Tanzania, only about 120 km’s from Mwanza City and 20 km’s Southeast of the nearest point of Lake Victoria. The company has its main office and operations in Geita, only 5 Km’s west of the fast-growing town of Geita, and a supporting office in Dar es Salaam. Applications are invited from ambitious, energetic and performance driven individuals to fill in vacant position(s) mentioned below:
Position: Operator 2 – Equipment
Department: Process Plant
Reporting to: Senior Supervisor – Mill/Treatment
Number of Positions:One (1)
GGML is an equal opportunity employer: Female candidates are highly encouraged to apply.
PURPOSE OF THE ROLE:
To operate the Milling Circuit in accordance with GGM’s Standard Operating Procedures (SOPs) to achieve the targets set by the Process Plant Management. The role holder is expected to strictly adhere to all GGM Health, Safety, and Environmental (HSE) procedures during milling operations. Additionally, the role requires full compliance with the GGM Code of Conduct, including observance of all security protocols within the plant and across the mine site.
QUALIFICATIONS:
• Ordinary level for secondary education or above.
EXPERIENCE:
• A minimum of 3 years of working experience in the process plant environment.
• General background in crushing, milling and/or processing preferred.
ADDITIONAL REQUIREMENTS:
• Ability to diagnose and troubleshoot problems at milling.
MAIN OR KEY ACCOUNTABILITIES:
Safety Health and Environment
• Maintain a clean, organized, and hazard-free work environment by ensuring proper disposal of waste, preventing spillage, securing tools and hoses, and keeping all equipment neatly arranged.
• Identify and report safety hazards, inspect and monitor gas levels, and test emergency equipment like safety shower.
• Adhere to PPE requirements and ensure all high-risk tasks are covered under valid permit to work procedures (eg, confined space, handrail removed)
• Maintain strict compliance with site safety standards and procedures.
Operational Units
Sag &Ball Mills
• Inspect for leaks, abnormal sounds and vibration, report faults.
• Monitor and adjust mill speed and load with the control room.
• Ensure scats chutes and bunkers are clear.
Hopper & Discharge pumps
• Maintain hopper levels and clear build-ups.
• Control spillage and ensure proper sump pump directions.
• Test and switch discharge pumps as schedule; avoid bogging during shutdown.
Gearbox & Lubrication
• Check gearbox vibration/noise and report irregularities.
• Monitor lube oil levels, leaks, and operate pumps as needed.
• Handle oil spills per GGM procedures.
Spillage Pumps
• Inspect for performance, condition, and availability.
• Ensure proper discharge line routing.
Mill Operations & Density Control
• Start and stop the SAG mill, and Ball mill, and discharge pumps according to GGM operating procedures and control room instructions.
• Monitor and record mill discharge densities (SAG and Ball) per log sheet to ensure optimal performance.
• Manually adjust milling water and feed water valves to control density and hopper levels as advised.
Water Management
• Monitor and maintain water ponds levels; prevent overflows and ensure raw water pond remains above 80%
• Ensure emergency sump pumps are always operational and in automatic mode.
• Top up cooling water tanks and clean pump filters as per schedule.
• Inspect and report the condition and performance of process, high-pressure, and raw water pumps.
Spillage Management
• Immediately report any spillage to the control room or shift supervisor.
• Clean and hose down spillage areas to maintain safety and housekeeping standards.
Planned tasks & Documentation
• Perform scheduled tasks as assigned by the senior supervisor through the weekly plan.
• Ensure QQTR tasks are fully explained, executed and job cards completed and signed off.
• Submit all records and inspections sheets timely and accurately.
MODE OF APPLICATION:
• Please apply by clicking APPLY NOW button below..
• On the portal you will be required to upload your detailed CV, copies of relevant certificates, e- mail and telephone contacts, names, and addresses of three referees. Please do not attach certificates that are not related to the qualifications stated above.
• You will also be required to upload a cover / application letter addressed to “Director – Manager Human Resources”, Geita Gold Mining Ltd”. Subject should be “Operator 2 – Equipment”
• If you struggle to apply via the link provided, please head over to our website https://www.geitamine.com/en/people/ for a step-by-step guide on how to apply for jobs on our recruitment portal (SuccessFactors).
• You will be required to present original certificates if you are contacted for interviews.
• Internal Applicants (those currently employed by AngloGold Ashanti) must have their application letter endorsed by their Head of Department (HOD) or Manager once Removed (MoR).
APPLICATION DEADLINE:
• Applications should reach the above on or before 30th October 2025 at 5:30 PM
• Only shortlisted candidates will be contacted for interviews.
How to Apply:
Job type Full-time Job, To submit your application, please follow the link provided below.
Check all: JOBS IN TANZANIA
Go to our Homepage To Get Relevant Information.
